---
description: How to mount FRX Pro
---

# Mounting

### FRX Pro Mounting

![](https://3429200414-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-LaNHxABbg20hfA0zTDQ%2F-LdEnGmqjheC6EoCz2pk%2F-LdEnIrWA4vZsnkPdiOT%2FFRXPro_Wiki_FRXProMounting.jpg?alt=media\&token=cb66d947-62a9-4756-bc6f-66f8476fdc5a)

* Install a FRX Pro module to your gimbal using the [Pop-n-Lock](https://store.freeflysystems.com/search?type=product\&q=Pop-n-Lock) dovetail and a Pop-n-Lock mounted to the pan axis of your gimbal. See the diagram below for suggested mounting areas on your gimbal.
  * If necessary you can update the orientation of the Pop-n-Lock dovetail to make adjust the orientation of the FRX Pro module.
  * Alternatively you can utilize the zip-tie features machined into the front face of FRX Pro to secure it to the mounting surface.

![](https://3429200414-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-LaNHxABbg20hfA0zTDQ%2F-LdF_bv42XtGDs5yQ1sq%2F-LdF_gXlRs9-WPEMDaM1%2FFRXPro_Wiki_GimbalMounting.jpg?alt=media\&token=2944726e-816c-471b-a4dd-99bddd45eb0b)

* Mount the other FRX Pro module to your MōVI Controller setup.&#x20;
  * We suggest using a [Screw Mount Pop-n-Lock](https://store.freeflysystems.com/collections/movi-pro/products/pop-n-lock-screw-mount-quick-release) kit to utilize one of the many 1/4-20" mounting location on the MōVI Controller and most monitors.

![](https://3429200414-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-LaNHxABbg20hfA0zTDQ%2F-LdO-azMlGajYm9TGiHl%2F-LdO-daz02iEk7mNyqBV%2FFRXPro_Wiki_GimbalMounting_02.jpg?alt=media\&token=eba36486-7291-4022-af81-3771f08e9d43)

### FRX Pro Wiring

#### Gimbal Side

* Unplug any devices from **COM1** of the gimbal's GCU.
  * When using FRX Pro you will no longer need the older MC-RX's. These can be removed from the gimbal.
* Use one of the COM Cables provided in the kit to connect the FRX Pro's UART port to the **COM1 port** of your gimbal.

![](https://3429200414-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-LaNHxABbg20hfA0zTDQ%2F-LdFWPpXO_97bqXwTkuK%2F-LdFWS8K8Mg66dX5eTDA%2FFRXPro_Wiki_WiringGimbalSide.jpg?alt=media\&token=187d6aee-5315-41a6-97a2-1594f47bc158)

#### Controller Side

* For power, connect the other FRX Pro module to an external power supply, such as a V-Lock battery using the FRX Pro D-Tap Power cable.
* For signal, connect the FRX Pro to the MōVI Controller using the USB Cable provided in the kit.
  * Ensure you have plugged the USB Cable into the bottom USB port on the MōVI Controller.

![](https://3429200414-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-LaNHxABbg20hfA0zTDQ%2F-LhqOcsut5P7INyKVQ39%2F-LhqOlQrVWF5804Q_afE%2FFRX%20manual%20BOM.ai_%20%40%20100%25%20\(RGB_GPU%20Preview\)%202019-06-20%2012.39.46.png?alt=media\&token=8517d69d-cc27-4ed5-b28e-33a451e60405)
