As of FW 1.4 Ember is able to use Ethernet to connect to iOS devices and use all of the features of the Freefly Ember app. This Ethernet connection can be direct, or using a router.
Index
Some Notes
To connect to Ember directly with iPad, you'll need an Ethernet cable and an Ethernet to USB-C adapter.
Settings > Ethernet will only appear if your adapter has been recognized by iPadOS.
Make sure to use a 1000 mbit ethernet adapter and cable to maximize your connection speed to Ember.
Make sure your Ember and App are up to date before attempting an Ethernet connection.
Ember App will remember the IP address you last used for your Camera.
You'll need to reset custom IP Address to the Wi-Fi Address to re-enable Wi-fi connections to Ember from your specific device.
To connect the App to Ember over Direct Ethernet Connection, You'll need to assign your iOS device a manual IP address and Connect the App to Ember's Static IP address.
Ember will not assign the iOS Device an IP address, and will assign itself the IP address 10.42.0.2 for its Ethernet interface. To be able to use Ethernet with the iOS Device you'll need to manually assign your iPhone/iPad an IP address. This will only need to be done once.
To connect your iOS device, Open the settings app and navigate to
Settings > Ethernet > USB 10/100/1000 LAN > Configure IP
Select "Automatic" and switch to “Manual”
And enter the following values into the Manual IP fields and click’ Save’ when done
IP Address
10.42.0.10
Subnet Mask
255.255.255.0
Router
[Leave Blank]
Bottom right of the Control Screen
Top right of the Monitor Screen
Once in Settings, navigate to Connect > Connection IP
For direct Ethernet Connections, You can just use the check mark to the right, to confirm the pre-filled static Ethernet IP Address.
Ember may connect automatically using the Wi-Fi IP Address if Wi-Fi is enabled. For use with Ember with Wi-Fi 'Off' use the Ethernet IP Address.
To connect the App to Ember using a Router Ethernet Connection, you'll need to connect Your iOS Device to that network and tell the App to Ember's Ethernet IP Address.
Typically, your router will assign Ember an IP Address for it's Ethernet interface when you insert the Ethernet Cable; the same way your router assigns your other devices IP Addresses. You can find Ember's Assigned IP address under the SSID/IP on the on on-camera Menu if you scroll down.
Note: While Router Ethernet connections are typically great for control, additional wireless clients on a network will degrade streaming and export speeds.
If Ember's Ethernet IP Address is 10.42.0.2, Restart Ember with the Ethernet Cable already inserted at both ends.
Configure your router to assign Ember a static IP address; Ember will be assigned the same IP address which the App will rembember and auto-connect to. Contact your network administrator to configure a static IP address for Ember.
Bottom right of the Control Screen
Top right of the Monitor Screen
Once in Settings, navigate to Connect > Connection IP
Router - A device that assigns IP addresses and routes network traffic to connected devices. Routers can connect Ethernet devices and Wi-Fi devices to the same network and talk to each other using IP addresses.
Updated 2020-09-20
In Ember App, Navigate to settings using The Settings Toggle button which can be found in the following locations on iOS:
In Ember App, Navigate to settings using The Settings Toggle button which can be found in the following locations on iOS:
