How to mount FRX Pro
Install a FRX Pro module to your gimbal using the Pop-n-Lock dovetail and a Pop-n-Lock mounted to the pan axis of your gimbal. See the diagram below for suggested mounting areas on your gimbal.
If necessary you can update the orientation of the Pop-n-Lock dovetail to make adjust the orientation of the FRX Pro module.
Alternatively you can utilize the zip-tie features machined into the front face of FRX Pro to secure it to the mounting surface.
Mount the other FRX Pro module to your MōVI Controller setup.
We suggest using a Screw Mount Pop-n-Lock kit to utilize one of the many 1/4-20" mounting location on the MōVI Controller and most monitors.
Unplug any devices from COM1 of the gimbal's GCU.
When using FRX Pro you will no longer need the older MC-RX's. These can be removed from the gimbal.
Use one of the COM Cables provided in the kit to connect the FRX Pro's UART port to the COM1 port of your gimbal.
For power, connect the other FRX Pro module to an external power supply, such as a V-Lock battery using the FRX Pro D-Tap Power cable.
For signal, connect the FRX Pro to the MōVI Controller using the USB Cable provided in the kit.
Ensure you have plugged the USB Cable into the bottom USB port on the MōVI Controller.
