Network and Connectivity
This section describes the connection process for Astro's built-in wifi chip. This functionality is useful while the aircraft is on the ground, for admin and setup tasks. Connecting the Astro to wifi is required to complete the initial Auterion Suite setup process.
Video
Text
- 1.Open AMC Herelink or PC. If using a PC, connect to Astro with a USB-C cable.
- 2.Power Astro.
- 3.Tap the icon in the top-left of AMC. Navigate to Vehicle Setup > WiFi
- 4.Select Station mode, which allows Astro to connect to another wifi network.
- 5.Enter the login credentials for your wifi access point.
Unlike the Herelink wifi, which is restricted to the 5GHz band, Astro's wifi chip is compatible with 5GHz and 2.4GHz bands.
- 1.Open AMC Herelink or PC. If using a PC, connect to Astro with a USB-C cable
- 2.Power Astro.
- 3.Tap the icon in the top-left of AMC. Navigate to Vehicle Setup > WiFi.
- 4.Select Access Point mode, which allows Astro to broadcast a wifi network that other devices can connect to.
If your Astro has an LTE sim card installed, you can utilize online features such as live video, real-time aircraft status, and flight logs through Auterion Suite.
Currently, Astro is only available with an LTE radio suitable for North American markets. Additional LTE compatibility will be available in the future.
- 1.Install a SIM card into Astro. Make sure to write down the SIM card number found on the card if you don't have it recorded elsewhere.
- 2.Open AMC Herelink or PC
- 3.Navigate to Vehicle Setup > Cellular
- 4.If you need to access the IMEI number for the vehicle to enable the SIM cards, connect to the Astro with a laptop and USB cable
- 1.Power on Astro with one battery only.
- 2.Connect the laptop and the Astro by plugging in a USB-C cable to the IO panel on the underside of the aircraft.
- 3.
- 4.On the bottom of the page, expand the "details" bar and scroll until you find the listed IMEI information
Region | 4G LTE Bands | Radio Spec Sheet |
North America | B2, B4, B5, B13, B17 | |
EMEA/Australia | Cat-4: B1, B3, B7, B8, B20, B28 |
Currently, Astro is only available with an LTE radio suitable for North American markets. Additional LTE compatibility will be available in the future.
When switching SIM cards, try leaving the APN field blank. It should be automatically detected. If not, here are a few suggestions.
Carrier | APN |
T-mobile | iot.tmowholesale, fast.t-mobile.com |
Orange | orange.m2m.spec |
Verizon |
In most cases, check the "Allow Roaming" box.
After changing the SIM, reboot both the aircraft and AMC.
Last modified 2mo ago