Isolation Upgrade

Smart Dovetail Isolator Upgrade Kit

Freefly offers a Smart Dovetail Isolation Upgrade kit to upgrade your Base Kit cheeseplate isolator to an isolator that is compatible with the Freefly Mapping Payload.

• If you buy an Astro Map, this isolator is already installed.

• If you buy a Mapping Payload, you will need to upgrade your Astro Base with this Isolator Upgrade.

To install this onto your aircraft, use the provided M3x8mm Button Head screws to install the isolator as follows:

• Install the Isolator Upgrade Kit onto the lower chassis so that the cable is facing the rear of the aircraft.

• Attach the isolator to the chassis using the 4x M3x8mm BHCS.

• Attach the safety lanyard to the lower chassis using 1x M3x4mm BHCS.

• Connect the Smart Dovetail connector to the IO panel on the underside of the Astro chassis.