Changing these settings requires Advanced Mode, which is not recommended for most pilots. Key safety features and parameters that keep Astro airborne can be disabled if changes are made without understanding their purpose. Keep in mind that changing settings in this mode poses an increased risk to property and safety if not done with careful consideration and care.
To switch to Advanced Mode and see many of these options, repeatedly tap on the AMC icon in the top-left-hand corner of the app. After tapping about 6 times, a popup menu will appear asking if you would like to switch to Advanced Mode. The icon will change once Advanced Mode is active. You can return to Standard Mode by repeating the process of tapping the icon until the menu appears and selecting the option to switch to Standard Mode.
Be very careful about the Autopilot Orientation setting when calibrating sensors in Advanced Mode. It should not be changed from the default value of ROTATION_YAW_270.
Please exercise extreme caution before changing parameters. Do not operate Astro with edited parameters unless you are certain you know what you're doing or have been instructed to do so by a Freefly employee.
Parameters are only accessible after enabling AMC's Advanced Mode
Enable AMC's advanced mode by rapidly tapping the AMC logo in the top left:
A popup to enable Advanced Mode will appear, confirm that you would like to switch to Advanced mode
Tap the AMC icon one more time to open the menu, and more options will now appear. Go into Advanced
Now scroll down to the bottom and choose Parameters, and parameters will now be accessible and searchable in the screen to the right
On occasion you may need to reset the parameters to the vehicle's default. To do this, once you navigate to parameters, click on Tools > Reset to vehicle's configuration defaults
Especially in support situations, we may ask you to load a parameter file. To do this, the file will need to be copied into AMC's visible folder so that it can load the file. AMC will be looking for parameters under Documents > Auterion Mission Control > Parameters
To load the parameter file, go to the parameter page and go to Tools > Load from file. As long as the file is in the right location, it should show up and be selectable to import the parameter changes
Provides a brief overview of the main vehicle setup bullet-points that pilots should consider before takeoff. If there is an issue with the sensors or radio, the green dots seen below will instead be red.
Currently, the only functionality of this screen is to change and test the functionality of the physical button on the top-right corner of the controller.
Use the dropdown to select the functionality of the button. Watch the box with the 0 in it while pressing the button to verify that it is working.
Select Compass, Gyroscope, or Accelerometer to recalibrate. Calibration is recommended for any sensors marked with a red dot.
Displays a live view of the radio inputs. Allows you to switch between Mode 1 and Mode 2 control schemes (Mode 2 recommended).
This screen is essential to operating Astro safely. Ensure that the altitude under Return To Launch Settings is higher than the tallest obstructing obstacle. For instance, if your mission takes place near a 65m tree, a return altitude of 60m is insufficient. If an RTL triggers while the aircraft and the landing point are on opposite sides of this tree and you are unable to regain control, it is unlikely that the aircraft will return to the ground safely in this scenario.
