Saving, Loading, and Resetting Parameters
Last updated
Last updated
ALTA Pro QGroundControl allows users to save, load, and reset all of ALTA Pro’s parameters. This is useful when trying to save certain parameters that will need to used again in the future or when troubleshooting and needing to get back to a known good state.
Saving parameters can be done in the Parameters tab of the Vehicle Setup menu. Navigate to the ‘Tools’ menu in the top right hand corner of the window and select ‘Save to file…’ from the dropdown. Then select a file name and folder to save to.
Loading parameters is also done from the Parameters tab of the Vehicle Setup menu. Navigate to the ‘Tools’ menu in the top right hand corner of the window and select ‘Load from file…’ from the dropdown. Then select the desired .params file to load.
To reset all ALTA Pro’s parameters to the ALTA Pro defaults follow the Loading Parameters instructions and load the ALTA Pro Default Parameters file. This can be found on the ALTA Pro support page.
Selecting the ‘Reset all to defaults’ option in the Tools menu will reset all parameters to the QGroundControl defaults. These are not the same as the ALTA Pro default parameters. To reset to ALTA Pro defaults load the ALTA PRO Default Parameters to the aircraft.
