Specification
DIMENSIONS
Mōvi XL
664 x 507 x 700mm (L*W*H)
Camera Cage
399 x 255 x 289mm (L*W*H)
MECHANICAL
Pan Range of Motion
±360º Continuous Rotation
Tilt Range of Motion
Software adjustable up to +90º/-170º
Roll Range of Motion
Software adjustable up to ±90º
Max Pan Rate
200º/s
Max Tilt Rate
200º/s
Max Roll Rate
200º/s
Weight
11kg
Max Payload
23kg
Max Operating Speed*
160kph
*Dependent on payload
Operating Temperatures
-20° to 50°C
Ingress Protection (IP)
IP52 resistance to dust and dripping water
Mounting System
MōVI XL Quick Release, Mitchell Mount
Materials
Carbon Fiber, 6061-T6 Aluminum, Glass Reinforced Polymers
ELECTRONICS
Data Logging Rate
5, 10, and 25 Hz
Connections
Bluetooth Low Energy v4.2 and 2.4GHz Custom FHSS Radio
Motor Type
Direct-drive 3 phase Brushless
Data Storage
microSD
Port Types
GCU ports -
COM1, 12V, COM 2
TSU Ports -
LTC Timecode In/Out, EXP, CANbus + Battery Voltage, CAM, 12-14V CAM, 12V AUX, F,I,Z, USB Type C
BATTERY
Nominal Battery Voltage
22.2V
Min - Max Battery Voltage
25.2V
Battery Capacity
1000 mAh
Cells
6 Cells
Max Battery Quantity
2 Batteries
Min Battery Quantity
1 Battery (using a single battery may decrease performance)
Max Continuous Discharge Rate (Per Pack)
25C
Max Peak Discharge Rate (Per Pack)
50C
GCU AND TSU LAYOUTS
GCU LAYOUT
Power Button
A. Push (ON)
B. Hold (OFF)
C. Double Tap (Pause/Resume)
Back Button
Forward Button
Select Option (-)
Select Option (+)
microSD Card Slot
GCU CONNECTOR LAYOUT
COM 1
12V
COM 2
TSU CONNECTOR LAYOUT
TC
EXP
CAN
CAM
12-14V 6A CAM
12V 2A AUX
Focus
Iris
Zoom
USB C DRP
CONNECTORS AND PINOUTS
All connector pinouts are shown looking into the function side of the connectors on the GCU and TSU, unless stated otherwise.
GIMBAL CONTROL UNIT
Connector
Type
Pin-Out
COM 1
JST GH 6-pin
Insert Image of Pin-Out -from front (2D)
1 - GND 2 - +5V 3 - UARTn_TX
4 - UARTn_RX 5 - UARTn_CTS 6 - UARTn_RTS
12V
Female P-TAP
Insert Image of Pin-Out -from front (2D)
+ 12V PTAP V+ - 12V PTAP GND
COM 2
JST GH 6-pin
Insert Image of Pin-Out -from front (2D)
1 - GND
2 - +5V 3 - UARTn_TX 4 - UARTn_RX 5 - UARTn_CTS 6 - UARTn_RTS
TILT STAGE UNIT
Connector
Type
Pin-Out
TC (LTC Timecode)
3.5mm Jack
Insert Image of Pin-Out
(Shown from Function Side of the male 3.5mm Jack)
1 - (Base, Mic) - LTC IN 2 - (Ring, Gnd) - GND 3 - (Ring, Right) - SYNC IN 4 - (Tip, Left) - LTC OUT
EXP (Expansion)
JST ZPH 10 Pin
Insert Image of Pin-Out
1 - GND
2 - +12V
3 - GND
4 - +5V
5 - TxD1/Tx- 6 - RxD1/Rx+
7 - TxD2/Tx+
8 - RxD2/Rx-
9 - GPI/UART RX 10 - GPO/UART TX
CAN (CANbus)
Molex MicroFit RA 4 Pin
Insert Image of Pin-Out
1 - GND
2 - +V Bat
3 - CAN H 4 - CAN L
CAM (Camera)
Molex MicroFit RA 8 Pin
Insert Image of Pin-Out
1 - GND
2 - +5V
3 - RxD 4 - TxD
5 - LANC Power
6 - LANC Signal 7 - GPO/UART TX 8 - GPI/UART RX
12-14V CAM (Camera Power)
Female P-TAP
Insert Image of Pin-Out -from front (2D)
+ 14V PTAP V+ - 14V PTAP GND
12V AUX (Auxiliary Power)
Female P-TAP
Insert Image of Pin-Out -from front (2D)
+ 12V PTAP V+ - 12V PTAP GND
F (Focus Motor)
Molex MicroFit RA 6 Pin
Insert Image of Pin-Out
1 - Motor A
2 - Motor B 3 - +5V 4 - GND 5 - Encoder A 6 - Encoder B
I (Iris Motor)
Molex MicroFit RA 6 Pin
Insert Image of Pin-Out
1 - Motor A
2 - Motor B 3 - +5V 4 - GND 5 - Encoder A 6 - Encoder B
Z (Zoom Motor)
Molex MicroFit RA 6 Pin
Insert Image or Pin-Out
1 - Motor A
2 - Motor B 3 - +5V 4 - GND 5 - Encoder A 6 - Encoder B
USB Port
USB Type C DRP (Source and Sink 5V)
Last updated
