Pilot Pro Public
  • Intro
  • Getting Started
  • Operating Handbook
    • User Interface
    • Ecosystem
      • RTK
    • Power and Charging
    • Radio Modules
      • Herelink Radio
      • Doodle Labs Radio Module
        • Doodle Pro Tips
        • Doodle Channel Selection
        • Doodle RJ45 Ethernet Port
        • Doodle Binding / Pairing
    • Input Output Mapping
      • Advanced Input Mapping
  • Maintenance
    • Troubleshooting
    • Software and Firmware Updates
      • Software Release Notes
  • Specs
    • Technical Specs
    • Radio Technical Specs
    • Testing and Certification
    • Compliance
  • Interfaces
    • Electrical Interfaces
    • Mechanical Interfaces
    • Software Interfaces
Powered by GitBook
On this page
Export as PDF
  1. Operating Handbook
  2. Radio Modules
  3. Doodle Labs Radio Module

Doodle Binding / Pairing

PreviousDoodle RJ45 Ethernet PortNextInput Output Mapping

Last updated 6 months ago

  • Ensure that your air and ground radios are at least 2 feet apart. Doodle radios are powerful, and if they are too close, they may create interference with each other.

  • Power on Astro with one battery.

  • Power on Pilot Pro.

  • Give it time. Each radio takes about 60 seconds from power-up to fully boot its system. Ensure both the air and ground radios have been powered on for at least 60 seconds before checking connectivity.

  • Open the Pilot Pro App and open the side menu

  • Navigate to "Radio Settings". Then open "Pairing Manager"

  • Find the bind button under Astro. Its next to the yellow XT connector on the IO Panel.

  • Also locate the external compass module (on boom 4).

  • Press on the bind button 3 times. Then make sure the LED on the external compass module starts to blink fast in white/pink.

  • Wait 30 seconds (for Doodle to fully switch to pairing mode). Then press Scan in the Pilot Pro App. From the list of results, find the one that matches Astro's serial number. Then press pair.

  • Wait 60 seconds for process to complete.

Opening side menu in the Pilot Pro App
Radio Settings location in the Pilot Pro App