Pilot Pro Public
  • Intro
  • Getting Started
  • Operating Handbook
    • User Interface
    • Ecosystem
      • RTK
    • Power and Charging
    • Radio Modules
      • Herelink Radio
      • Doodle Labs Radio Module
        • Doodle Pro Tips
        • Doodle Channel Selection
        • Doodle RJ45 Ethernet Port
        • Doodle Binding / Pairing
    • Input Output Mapping
      • Advanced Input Mapping
  • Maintenance
    • Troubleshooting
    • Software and Firmware Updates
      • Software Release Notes
  • Specs
    • Technical Specs
    • Radio Technical Specs
    • Testing and Certification
    • Compliance
  • Interfaces
    • Electrical Interfaces
    • Mechanical Interfaces
    • Software Interfaces
Powered by GitBook
On this page
Export as PDF
  1. Specs

Radio Technical Specs

Technical Specifications for the Pilot Pro RF Module

All radio backpacks use the Freefly Standard Radio Mounting Pattern

These are the radio's technical specifications, and features may or may not be implemented

Manufacturer:

Herelink

Model/Part Number:

Custom Freefly Herelink Tx

NDAA Compliant

No

Blue Cleared

No

Frequency Band:

2.4 GHz

2.400 GHz - 2.4835 GHz

Global ISM Band

Radio Configuration:

2x2

OTA Encryption

AES-128-CTR

Max RF Power at SMA port

200mW

23dB

Receiver Sensitivity

-99dBm

At 20MHz Bandwidth

Manufacturer:

Doodle Labs

Model/Part Number:

RM-1700-22M3

NDAA Compliant

Yes

Blue Cleared

Yes

Frequency Type 1:

915 MHz (Disabled)

902 MHz to 928 MHz Global ISM Band

Frequency Type 2:

2450 MHz

2400 MHz to 2482 MHz Global ISM Band

Radio Configuration:

2x2 MIMO

OTA Encryption

128-bit AES 256-bit AES (Disabled)

128 - Full throughput 256 - 12 Mbps max throughput

Command & Control

Ultra-Reliable Low Latency Channel (URLLC)

Latency 1.5-10ms

Max RF Power at SMA port

1.0W (30 dBm) @ MCS 0,8 0.8W (29 dBm) @ MCS 3,11 0.5W (27 dBm) @ MCS 5,13 250mW (24 dBm) @MCS 7,15

Antenna Receive Signal Strength

-30 to -90 dBm (Recommended)

Absolute Maximum= +12 dBm

Receiver LNA Gain

15 dB

RF Power Control

1 dBm step

Tolerance ±1 dBm

Automatic Transmit Power Control (ATPC)

Intelligently adjusts the transmit power for very close range operation

Wireless Error Correction

FEC, ARQ

Receive Noise Figure

+4 dB

Receive Adjacent Channel Rejection (ACRR)

34 dB

@ MCS0 for 20 MHz channel (Typ)

Transmitter Adjacent Channel Leakage Ratio (ACLR)

< 28 dBr (Fc ± ChBW)

Transmitter Spurious Emission Suppression

< 40 dBc

Frequency Accuracy

±10 ppm max over life

Manufacturer:

RFDesign

Model/Part Number:

RFD900x-US

NDAA Compliant

Yes

Blue Cleared

Yes

FCC Acceptance Number:

2ADLE-900UX2

Frequency Band:

915 MHz

902 MHz - 928 MHz

Global ISM Band

Radio Configuration:

2x2

Diversity Switched

OTA Encryption

AES-128-CTR

Max RF Power at SMA port

1W

+30dBm

RF Power Control

1dB steps

+/- 1dB @=20dBm typical

Receive Sensitivity

-111 dBm at 12kbps

-105 dBm at 64kbps

-98 dBm at 200kbps

Temp. Range:

-40 to +85 deg C

PreviousTechnical SpecsNextTesting and Certification

Last updated 3 months ago