Maintenance
Everything you need to know to maintain a safe and functional LiDAR sensor
Sensor Cleaning
Based on the sensor usage you may see dust, bugs and/or layers of mud/debris on the window. Before you attempt to clean your sensor, please read the instructions below on best practices.
Required Materials
Clean microfiber cloth (included).
Warm water.
Mild liquid dishwashing soap.
Spray bottle with clean water.
Spray bottle with mild soapy water.
99% Isopropyl alcohol.
Avoid getting water into the Smart Dovetail Connector or GNSS Module Lemo Connectors
Avoid using hard water when cleaning the sensor.
Do not use acetone to clean the window. It will embrittle the polycarbonate.
Do not wipe dirt directly from the sensor. Spray it off with warm water first.
Procedure
Remove Loose Debris
Using the 99% isopropyl alcohol and a clean microfiber towel, gently wipe away bugs/mud/debris from the sensor.
Clean with Soapy Water
Spray the sensor with warm, mild-soapy water. Using a clean microfiber towel, wipe gently along the curve of the sensor, not top to bottom, to avoid scratches (think moving with the grain).
Rinse the Sensor
Spray the sensor with clean water to remove any remaining soap residue.
Dry Thoroughly
Use a second clean, dry microfiber towel to dry the sensor.
Last updated