Astro Public
  • Pilot's Operating Handbook
    • Getting Started
    • System Overview
    • Flight Part 1 - Flight Modes
    • Flight Part 2 - Operation
    • Flight Part 3 - Emergency / Advanced
    • Essential Software
      • Auterion Mission Control
        • AMC - Fly
        • AMC - Plan
          • Transfer Mission Plan and KML Files with Herelink
          • Terrain Follow
          • Offline Maps
        • AMC - Vehicle Setup
          • Advanced Vehicle Setup
          • Parameters
        • AMC - Photos
        • AMC - User Account
        • AMC - Settings
          • Advanced Mode
      • Auterion Suite / Flight Logs
      • Network and Connectivity
    • Pro Tips and Limitations
      • Travel and Shipping
  • Maintenance
    • FAQ & Troubleshooting
    • Software Updates
      • Updating Firmware
      • Astro Software v2.0 - What's New
      • Astro Software v1.7 - What’s New
      • Astro Software v1.4 - What’s New
      • Astro Software v1.2 - What’s New
    • Standard Maintenance Procedures
      • Getting Technical Support
      • Periodic Maintenance
      • Replacing Components
        • Replacing Propellers
        • Installing a SIM Card
      • Calibration and Tuning
      • Controller / Radio Binding
  • Other User Manuals
    • FREEFLY PAYLOADS
      • LR1 Payload
        • Payload Overview and Setup
        • Expansion Modules
          • LR1 Thermal Module
          • LR1 Distance Sensor
        • Mapping/Inspection/Video Workflow
        • LR1 Lenses and Expansion
          • Changing Lenses
            • Advanced Gimbal Tuning
          • Expansion Ports
        • What changed between A7R4 and LR1 Payload?
        • Technical Specs
        • LR1 Sample Mapping Data
      • A7R4 Payload
        • Packing, Handling, and Setup
        • Camera Controls
        • Mapping/Inspection/Video Workflow
        • Resetting Camera Settings
        • Calibration and Tuning
        • Technical Specs and Lenses
      • Ventus OGI Payload
        • Operating Handbook
          • Setting up Astro with OGI
          • Pre-flight Planning
          • Settings
          • Configure Gas Enhancement Mode
          • Advanced Operation
          • Downloading/Formatting Media
        • Protips, Limitations, and Troubleshooting
        • Technical Specs
      • Wiris Pro Payload
        • Operating Handbook
          • Setting up Astro with Wiris Pro
          • Pre-flight Planning
          • Advanced Operation
          • Inspection Workflow
          • Downloading Media/Example Output
          • Formatting Media
        • Protips, Limitations, and Troubleshooting
        • Technical Specs
        • Camera Software
        • Glossary
        • Integration for 3rd Party Applications
          • Mechanical Interface
          • Electrical Interface
          • Operational Limitations
      • Workflows/Maintenance/Updates
        • Installing/Removing Payloads
        • Mapping Workflow and Output
          • Pre-flight Planning
          • Mapping Efficiency Tips
          • Mapping Flight and Post Processing
          • PPK Software
          • Output Specification
          • Sample Mapping Data
        • Inspection Workflow
        • Gimbal Firmware
        • Gimbal Logs
        • USB Formatting
        • Isolation System
        • Precise/Smooth Gimbal Control
      • FPV Camera
    • 3RD PARTY PAYLOADS
      • Hovermap ST-X Lidar
        • Hovermap Setup on Astro
        • Mapping with Hovermap
        • Assisted/Autonomous Flight
      • Gremsy Pixy PE
      • Gremsy Vio
      • Sentera 6X/65R
    • ECOSYSTEM
      • Components
        • Batteries
        • Pilot Pro Controller
        • Herelink Handset (Legacy)
          • Herelink Controller Maintenance
            • Updating Herelink Software
            • Switching to Freefly Updater
            • Removing/Reinstalling the Herelink Cover
        • Vibration Isolators
        • GNSS Base Stations
      • Development Tools
        • MavSDK
        • Software Interfaces
        • Payload Mounting Interfaces
        • Electrical Interfaces
        • Onboard Computer
      • DIU Blue sUAS
      • FAA Remote Identification (RID)
      • Esri ArcGIS Flight (Site Scan)
        • 1 - Setup and Connecting to Astro
        • 2 - Preflight and Mission Planning
        • 3 - Flying a Mission with Astro
        • 4 - Post-Flight and Image Processing
        • Global Settings
      • DroneDeploy
    • SPECS AND INTERFACES
      • Technical Specs
      • Performance
      • Drawings and CAD
      • Compliance
    • Legal
Powered by GitBook
On this page
  • Saving Photos to Camera and USB Simultaneously
  • Changing A7R-IV Settings
  • Resetting a7R-IV Settings
Export as PDF
  1. Other User Manuals
  2. FREEFLY PAYLOADS
  3. A7R4 Payload

Camera Controls

PreviousPacking, Handling, and SetupNextMapping/Inspection/Video Workflow

Last updated 6 months ago

Camera Settings

AMC provides control of these settings in flight by pressing the icon on the right of the screen while in Photo Mode:

AMC will override these camera body settings:

  • Shooting Mode dial, if set to P.

  • Exposure Compensation dial, if set to 0.

Other camera body controls and menu options will be honored. For example:

  • Focus Mode (e.g. wide, zone).

  • Exposure Metering Mode (e.g. spot).

  • Exposure Compensation dial, if set to non-0 value.

Saving Photos to Camera and USB Simultaneously

pre-setup

  • make sure the camera sd card is plugged into the first slot of the camera

  • make sure the usb is plugged into astro

taking photo

  • Turn on both the astro and herelink, and on AMC navigate to "FLY" screen on AMC

  • now, click on the menu/filter icon, right below the shutter icon

  • scroll all the way to the boot - where it says "image storage"

  • in that drop-down, select "both"

  • now you can click photo via AMC or herelink

  • remove both usb and sd card from camera, and you should see the photos you clicked

  • Note: the time stamp on camera photos = time set in the camera

Changing A7R-IV Settings

Astro remembers the settings that you can change within the AMC software. Next time you power on the system and when the camera establishes a connection with Astro, Astro will set these settings.

If a setting is not exposed in the app, we are most likely not overriding this setting. In order for these settings to be changed and saved even if the unit is powered off, follow the below procedure:

  • Using the wheel on the controller, tilt the gimbal/camera down at an angle so it's easier to access the buttons on the camera.

  • Using the menu or “fn” buttons on the camera, change the desired settings.

  • Turn the camera power off by using the rotary switch on top of the camera.

  • Wait 10 seconds. The camera takes a while to save settings to its own memory.

  • Power the camera back on. Confirm that the settings that you changed have persisted.

Resetting a7R-IV Settings

Resetting Camera Settings
Camera settings and their recommended defaults