Astro Public
  • Pilot's Operating Handbook
    • Getting Started
    • System Overview
    • Flight Part 1 - Flight Modes
    • Flight Part 2 - Operation
    • Flight Part 3 - Emergency / Advanced
    • Essential Software
      • Auterion Mission Control
        • AMC - Fly
        • AMC - Plan
          • Transfer Mission Plan and KML Files with Herelink
          • Terrain Follow
          • Offline Maps
        • AMC - Vehicle Setup
          • Advanced Vehicle Setup
          • Parameters
        • AMC - Photos
        • AMC - User Account
        • AMC - Settings
          • Advanced Mode
      • Auterion Suite / Flight Logs
      • Network and Connectivity
    • Pro Tips and Limitations
      • Travel and Shipping
  • Maintenance
    • FAQ & Troubleshooting
    • Software Updates
      • Updating Firmware
      • Astro Software v2.0 - What's New
      • Astro Software v1.7 - What’s New
      • Astro Software v1.4 - What’s New
      • Astro Software v1.2 - What’s New
    • Standard Maintenance Procedures
      • Getting Technical Support
      • Periodic Maintenance
      • Replacing Components
        • Replacing Propellers
        • Installing a SIM Card
      • Calibration and Tuning
      • Controller / Radio Binding
  • Other User Manuals
    • FREEFLY PAYLOADS
      • LR1 Payload
        • Payload Overview and Setup
        • Expansion Modules
          • LR1 Thermal Module
          • LR1 Distance Sensor
        • Mapping/Inspection/Video Workflow
        • LR1 Lenses and Expansion
          • Changing Lenses
            • Advanced Gimbal Tuning
          • Expansion Ports
        • What changed between A7R4 and LR1 Payload?
        • Technical Specs
        • LR1 Sample Mapping Data
      • A7R4 Payload
        • Packing, Handling, and Setup
        • Camera Controls
        • Mapping/Inspection/Video Workflow
        • Resetting Camera Settings
        • Calibration and Tuning
        • Technical Specs and Lenses
      • Ventus OGI Payload
        • Operating Handbook
          • Setting up Astro with OGI
          • Pre-flight Planning
          • Settings
          • Configure Gas Enhancement Mode
          • Advanced Operation
          • Downloading/Formatting Media
        • Protips, Limitations, and Troubleshooting
        • Technical Specs
      • Wiris Pro Payload
        • Operating Handbook
          • Setting up Astro with Wiris Pro
          • Pre-flight Planning
          • Advanced Operation
          • Inspection Workflow
          • Downloading Media/Example Output
          • Formatting Media
        • Protips, Limitations, and Troubleshooting
        • Technical Specs
        • Camera Software
        • Glossary
        • Integration for 3rd Party Applications
          • Mechanical Interface
          • Electrical Interface
          • Operational Limitations
      • Workflows/Maintenance/Updates
        • Installing/Removing Payloads
        • Mapping Workflow and Output
          • Pre-flight Planning
          • Mapping Efficiency Tips
          • Mapping Flight and Post Processing
          • PPK Software
          • Output Specification
          • Sample Mapping Data
        • Inspection Workflow
        • Gimbal Firmware
        • Gimbal Logs
        • USB Formatting
        • Isolation System
        • Precise/Smooth Gimbal Control
      • FPV Camera
    • 3RD PARTY PAYLOADS
      • Hovermap ST-X Lidar
        • Hovermap Setup on Astro
        • Mapping with Hovermap
        • Assisted/Autonomous Flight
      • Gremsy Pixy PE
      • Gremsy Vio
      • Sentera 6X/65R
    • ECOSYSTEM
      • Components
        • Batteries
        • Pilot Pro Controller
        • Herelink Handset (Legacy)
          • Herelink Controller Maintenance
            • Updating Herelink Software
            • Switching to Freefly Updater
            • Removing/Reinstalling the Herelink Cover
        • Vibration Isolators
        • GNSS Base Stations
      • Development Tools
        • MavSDK
        • Software Interfaces
        • Payload Mounting Interfaces
        • Electrical Interfaces
        • Onboard Computer
      • DIU Blue sUAS
      • FAA Remote Identification (RID)
      • Esri ArcGIS Flight (Site Scan)
        • 1 - Setup and Connecting to Astro
        • 2 - Preflight and Mission Planning
        • 3 - Flying a Mission with Astro
        • 4 - Post-Flight and Image Processing
        • Global Settings
      • DroneDeploy
    • SPECS AND INTERFACES
      • Technical Specs
      • Performance
      • Drawings and CAD
      • Compliance
    • Legal
Powered by GitBook
On this page
  • Precise Control
  • Search and rescue
  • Inspections
  • Mapping
Export as PDF
  1. Other User Manuals
  2. FREEFLY PAYLOADS
  3. Wiris Pro Payload
  4. Operating Handbook

Advanced Operation

PreviousPre-flight PlanningNextInspection Workflow

Last updated 6 months ago

To have the images geotagged with the location of the aircraft, attach a USB thumb drive to Astro’s USB-C port and select ‘USB storage’ in the image storage options.

We recommend clearing out extra photos from your USB drive to reduce the time it takes Astro to sync the USB drive files with the gallery when first plugged in

Precise Control

Search and rescue

  • The flight path of Astro is displayed with a red line on the map in AMC, which can be useful for looking at the area the aircraft has already covered

  • Setting an isotherm to show colors between a specified temperature range can help with identifying areas of interest quicker

  • Streaming live video from the aircraft to the Auterion Suite is possible with a strong LTE connection. Additional information on setting up LTE on Astro is here:

Inspections

DIU Blue Astros come with stealth logging enabled, which stops GPS data from being written to imagery and logs. to allow GPS data to be written to photos

  • The Wiris Pro EO camera provides 1920x1080 images and 1280x720 video from a 1-10x zoom lens. When approaching an object of interest, we recommend keeping the aircraft a safe distance away and zooming in as much as needed to see the detail level required for inspections.

  • When using Slow Speed Mode, camera tilt and pan are scaled with the zoom rate, so the control inputs become less sensitive the more zoomed the camera is.

Be careful not to become disoriented when flying with the camera zoomed in. We recommend resetting the camera zoom to 1x before flying to a new inspection location.

Mapping

  • The Wiris Pro Payload currently does not support mapping missions.

Precise/Smooth Gimbal Control
Network and Connectivity
Stealth logging must be disabled