Astro Public
  • Pilot's Operating Handbook
    • Getting Started
    • System Overview
    • Flight Part 1 - Flight Modes
    • Flight Part 2 - Operation
    • Flight Part 3 - Emergency / Advanced
    • Essential Software
      • Auterion Mission Control
        • AMC - Fly
        • AMC - Plan
          • Transfer Mission Plan and KML Files with Herelink
          • Terrain Follow
          • Offline Maps
        • AMC - Vehicle Setup
          • Advanced Vehicle Setup
          • Parameters
        • AMC - Photos
        • AMC - User Account
        • AMC - Settings
          • Advanced Mode
      • Auterion Suite / Flight Logs
      • Network and Connectivity
    • Pro Tips and Limitations
      • Travel and Shipping
  • Maintenance
    • FAQ & Troubleshooting
    • Software Updates
      • Updating Firmware
      • Astro Software v2.0 - What's New
      • Astro Software v1.7 - What’s New
      • Astro Software v1.4 - What’s New
      • Astro Software v1.2 - What’s New
    • Standard Maintenance Procedures
      • Getting Technical Support
      • Periodic Maintenance
      • Replacing Components
        • Replacing Propellers
        • Installing a SIM Card
      • Calibration and Tuning
      • Controller / Radio Binding
  • Other User Manuals
    • FREEFLY PAYLOADS
      • LR1 Payload
        • Payload Overview and Setup
        • Expansion Modules
          • LR1 Thermal Module
          • LR1 Distance Sensor
        • Mapping/Inspection/Video Workflow
        • LR1 Lenses and Expansion
          • Changing Lenses
            • Advanced Gimbal Tuning
          • Expansion Ports
        • What changed between A7R4 and LR1 Payload?
        • Technical Specs
        • LR1 Sample Mapping Data
      • A7R4 Payload
        • Packing, Handling, and Setup
        • Camera Controls
        • Mapping/Inspection/Video Workflow
        • Resetting Camera Settings
        • Calibration and Tuning
        • Technical Specs and Lenses
      • Ventus OGI Payload
        • Operating Handbook
          • Setting up Astro with OGI
          • Pre-flight Planning
          • Settings
          • Configure Gas Enhancement Mode
          • Advanced Operation
          • Downloading/Formatting Media
        • Protips, Limitations, and Troubleshooting
        • Technical Specs
      • Wiris Pro Payload
        • Operating Handbook
          • Setting up Astro with Wiris Pro
          • Pre-flight Planning
          • Advanced Operation
          • Inspection Workflow
          • Downloading Media/Example Output
          • Formatting Media
        • Protips, Limitations, and Troubleshooting
        • Technical Specs
        • Camera Software
        • Glossary
        • Integration for 3rd Party Applications
          • Mechanical Interface
          • Electrical Interface
          • Operational Limitations
      • Workflows/Maintenance/Updates
        • Installing/Removing Payloads
        • Mapping Workflow and Output
          • Pre-flight Planning
          • Mapping Efficiency Tips
          • Mapping Flight and Post Processing
          • PPK Software
          • Output Specification
          • Sample Mapping Data
        • Inspection Workflow
        • Gimbal Firmware
        • Gimbal Logs
        • USB Formatting
        • Isolation System
        • Precise/Smooth Gimbal Control
      • FPV Camera
    • 3RD PARTY PAYLOADS
      • Hovermap ST-X Lidar
        • Hovermap Setup on Astro
        • Mapping with Hovermap
        • Assisted/Autonomous Flight
      • Gremsy Pixy PE
      • Gremsy Vio
      • Sentera 6X/65R
    • ECOSYSTEM
      • Components
        • Batteries
        • Pilot Pro Controller
        • Herelink Handset (Legacy)
          • Herelink Controller Maintenance
            • Updating Herelink Software
            • Switching to Freefly Updater
            • Removing/Reinstalling the Herelink Cover
        • Vibration Isolators
        • GNSS Base Stations
      • Development Tools
        • MavSDK
        • Software Interfaces
        • Payload Mounting Interfaces
        • Electrical Interfaces
        • Onboard Computer
      • DIU Blue sUAS
      • FAA Remote Identification (RID)
      • Esri ArcGIS Flight (Site Scan)
        • 1 - Setup and Connecting to Astro
        • 2 - Preflight and Mission Planning
        • 3 - Flying a Mission with Astro
        • 4 - Post-Flight and Image Processing
        • Global Settings
      • DroneDeploy
    • SPECS AND INTERFACES
      • Technical Specs
      • Performance
      • Drawings and CAD
      • Compliance
    • Legal
Powered by GitBook
On this page
  • Weather
  • Checks
Export as PDF
  1. Other User Manuals
  2. FREEFLY PAYLOADS
  3. Wiris Pro Payload
  4. Operating Handbook

Pre-flight Planning

PreviousSetting up Astro with Wiris ProNextAdvanced Operation

Last updated 1 year ago

Weather

  • While Astro can fly in the rain, the Wiris Pro camera does not offer any ingress protection, so we do not recommend flying in any precipitation.

  • In cold temperatures:

    • We recommend allowing 3-5 minutes of warm-up time after powering on. This allows the IR sensor inside the Wiris Pro to reach a steady operating temperature for the most accurate temperature measurements. During the warmup time, the gimbal and camera will still work as normal, however the temperature data from the IR sensor may be less accurate.

    • Make sure your Astro batteries don't get too cold. More info can be found in this section of .

  • The Wiris Pro Payload matches Astro's operational temperature range of -20C to +50C

Checks

  • Check that the Wiris Pro Payload is secured in the Smart Dovetail mount and that the safety latch is closed.

  • When you’re ready to fly, perform the standard preflight checks for Astro (found below).

the wiki
Flight Part 2 - Operation