Astro Public
  • Pilot's Operating Handbook
    • Getting Started
    • System Overview
    • Flight Part 1 - Flight Modes
    • Flight Part 2 - Operation
    • Flight Part 3 - Emergency / Advanced
    • Essential Software
      • Auterion Mission Control
        • AMC - Fly
        • AMC - Plan
          • Transfer Mission Plan and KML Files with Herelink
          • Terrain Follow
          • Offline Maps
        • AMC - Vehicle Setup
          • Advanced Vehicle Setup
          • Parameters
        • AMC - Photos
        • AMC - User Account
        • AMC - Settings
          • Advanced Mode
      • Auterion Suite / Flight Logs
      • Network and Connectivity
    • Pro Tips and Limitations
      • Travel and Shipping
  • Maintenance
    • FAQ & Troubleshooting
    • Software Updates
      • Updating Firmware
      • Astro Software v2.0 - What's New
      • Astro Software v1.7 - What’s New
      • Astro Software v1.4 - What’s New
      • Astro Software v1.2 - What’s New
    • Standard Maintenance Procedures
      • Getting Technical Support
      • Periodic Maintenance
      • Replacing Components
        • Replacing Propellers
        • Installing a SIM Card
      • Calibration and Tuning
      • Controller / Radio Binding
  • Other User Manuals
    • FREEFLY PAYLOADS
      • LR1 Payload
        • Payload Overview and Setup
        • Expansion Modules
          • LR1 Thermal Module
          • LR1 Distance Sensor
        • Mapping/Inspection/Video Workflow
        • LR1 Lenses and Expansion
          • Changing Lenses
            • Advanced Gimbal Tuning
          • Expansion Ports
        • What changed between A7R4 and LR1 Payload?
        • Technical Specs
        • LR1 Sample Mapping Data
      • A7R4 Payload
        • Packing, Handling, and Setup
        • Camera Controls
        • Mapping/Inspection/Video Workflow
        • Resetting Camera Settings
        • Calibration and Tuning
        • Technical Specs and Lenses
      • Ventus OGI Payload
        • Operating Handbook
          • Setting up Astro with OGI
          • Pre-flight Planning
          • Settings
          • Configure Gas Enhancement Mode
          • Advanced Operation
          • Downloading/Formatting Media
        • Protips, Limitations, and Troubleshooting
        • Technical Specs
      • Wiris Pro Payload
        • Operating Handbook
          • Setting up Astro with Wiris Pro
          • Pre-flight Planning
          • Advanced Operation
          • Inspection Workflow
          • Downloading Media/Example Output
          • Formatting Media
        • Protips, Limitations, and Troubleshooting
        • Technical Specs
        • Camera Software
        • Glossary
        • Integration for 3rd Party Applications
          • Mechanical Interface
          • Electrical Interface
          • Operational Limitations
      • Workflows/Maintenance/Updates
        • Installing/Removing Payloads
        • Mapping Workflow and Output
          • Pre-flight Planning
          • Mapping Efficiency Tips
          • Mapping Flight and Post Processing
          • PPK Software
          • Output Specification
          • Sample Mapping Data
        • Inspection Workflow
        • Gimbal Firmware
        • Gimbal Logs
        • USB Formatting
        • Isolation System
        • Precise/Smooth Gimbal Control
      • FPV Camera
    • 3RD PARTY PAYLOADS
      • Hovermap ST-X Lidar
        • Hovermap Setup on Astro
        • Mapping with Hovermap
        • Assisted/Autonomous Flight
      • Gremsy Pixy PE
      • Gremsy Vio
      • Sentera 6X/65R
    • ECOSYSTEM
      • Components
        • Batteries
        • Pilot Pro Controller
        • Herelink Handset (Legacy)
          • Herelink Controller Maintenance
            • Updating Herelink Software
            • Switching to Freefly Updater
            • Removing/Reinstalling the Herelink Cover
        • Vibration Isolators
        • GNSS Base Stations
      • Development Tools
        • MavSDK
        • Software Interfaces
        • Payload Mounting Interfaces
        • Electrical Interfaces
        • Onboard Computer
      • DIU Blue sUAS
      • FAA Remote Identification (RID)
      • Esri ArcGIS Flight (Site Scan)
        • 1 - Setup and Connecting to Astro
        • 2 - Preflight and Mission Planning
        • 3 - Flying a Mission with Astro
        • 4 - Post-Flight and Image Processing
        • Global Settings
      • DroneDeploy
    • SPECS AND INTERFACES
      • Technical Specs
      • Performance
      • Drawings and CAD
      • Compliance
    • Legal
Powered by GitBook
On this page
  • Accessing Advanced Parameters
  • Advanced Parameter Commands
  • Resetting Parameters to Factory Defaults
  • Loading Parameter Files
Export as PDF
  1. Pilot's Operating Handbook
  2. Essential Software
  3. Auterion Mission Control
  4. AMC - Vehicle Setup

Parameters

PreviousAdvanced Vehicle SetupNextAMC - Photos

Last updated 9 months ago

Accessing Advanced Parameters

Please exercise extreme caution before changing parameters. Do not operate Astro with edited parameters unless you are certain you know what you're doing or have been instructed to do so by a Freefly employee.

Parameters are only accessible after

  1. Enable AMC's advanced mode by rapidly tapping the AMC logo in the top left:

  2. A popup to enable Advanced Mode will appear, confirm that you would like to switch to Advanced mode

  1. Tap the AMC icon one more time to open the menu, and more options will now appear. Go into Advanced

  1. Now scroll down to the bottom and choose Parameters, and parameters will now be accessible and searchable in the screen to the right

Advanced Parameter Commands

Resetting Parameters to Factory Defaults

On occasion you may need to reset the parameters to the vehicle's default. To do this, once you navigate to parameters, click on Tools > Reset to vehicle's configuration defaults

Loading Parameter Files

Especially in support situations, we may ask you to load a parameter file. To do this, the file will need to be copied into AMC's visible folder so that it can load the file. AMC will be looking for parameters under Documents > Auterion Mission Control > Parameters

To load the parameter file, go to the parameter page and go to Tools > Load from file. As long as the file is in the right location, it should show up and be selectable to import the parameter changes

enabling AMC's Advanced Mode
Enabling Advanced Mode and accessing parameters