FPV Camera

First Person View for Astro!

Installation

  • Mount the FPV module to the front of Astro with two M3x12 FHCS fasteners, which are included in the FPV kit. These use the red hex driver, included with Astro.

  • Plug the cable into the USB-C port on the Astro IO panel

  • Upgrade your Astro firmware to 1.5 or later

The FPV module can stay on Astro while folded up in the case!

If you're having trouble getting video, make sure the USB-C cable is fully plugged in

USB-C Thumb Drive Port

  • Plug in your USB-C thumb drive to the port on the front of the module

  • Under camera settings, you should see the thumb drive icon light up and the storage change to the available space on the drive.

You can only save images/video from the FPV camera on to an external USB drive

PreviousMapping with HovermapNext3rd Party Payloads

Last updated