Comment on page
This page describes how to use the camera control capabilities of the Mōvi Controller to change the image settings of the Panasonic BGH1 or BS1H.
Users can adjust shutter angle, ISO, and color temperature using the Mōvi Controller on Mōvi Carbon with the Panasonic BGH1 or BS1H camera.
- Mōvi Carbon
- GCU FW 2.2.0 or greater
- TSU FW 2.1.0 or greater
- Movi Controller FW v4.3.0 or greater
- Panasonic BGH1 or BS1H camera
Image settings are located under the Cam Image menu. The following settings may be adjusted from the Mōvi Controller:
- Shutter Angle
- Color Temperature
The camera must be in manual mode to allow full camera control. Shutter speed and gain (sensitivity) must be set to ANGLE/ISO. White balance should be set to color temperature K1, K2, K3, or K4.
The shutter angle may be changed from 11° to 358°.
The ISO may be adjusted from Auto to 204800. Note camera configuration may limit the minimum or maximum ISO setting.
The color temperature may be adjusted from 2500 K to 10000 K. The camera WB setting must be configured to color temperature K1-K4. If a WB setting other than K1-K4 is selected, Mōvi Controller will report the color temperature as zero.