Connect Mōvi Controller and FRX Pro to your Mōvi

How to connect the Mōvi Controller and FRX Pro to your Mōvi

1. On the receiver (gimbal) side, plug one end of the included COM cable into the FRX Pro UART port. Plug the other end of the cable into COM 1 on the top of the GCU (the screen on the gimbal).

Plug the COM cable into the UART port on the FRX Pro receiver.

Plug the other end of the COM cable into the COM 1 port on top of the gimbal GCU.

1. On the transmitter side, plug the included USB A-C cable into the USB-C port on the FRX Pro. Then, plug the included D-Tap cable into the CAN port.

Plug the included USB A-C cable into the USB-C port on the FRX transmitter. Plug the included D-Tap cable into the CAM port.

1. On the controller, plug the USB A side of the cable into the bottom USB-A port. Then, plug the D-Tap cable into the D-Tap port on the battery or battery plate.

Plug the COM cable into the bottom USB port. Plug the D-Tap into the D-Tap port on either the battery or battery plate.

1. On the controller menu, go to HOME> RADIO CONFIG> RADIO TYPE and change from INTERNAL to USB. Once the setting has been changed, 'Write' it to the MōVI Controller's memory by selecting the 'Write' field on the next line and pressing the Menu Set knob.

• To use the old MC-RX receiver with the MōVI Controller, you must set the Radio Type back to 'Internal’.

Change the Radio Type from Internal to USB. Write it to the controllers' memory by selecting the write field and pressing the menu set knob.

1. You can read about the FRX Pro binding procedure here.

2. You can read about the FRX Pro mounting procedure here.