Freefly Public
  • Freefly Wiki
  • Products
    • Astro
    • Pilot Pro
    • ALTA X
      • Introducing ALTA X
        • Features
      • Quick Start Guide
      • Aircraft Setup
      • Procedures
      • Integrations
        • DIU Blue sUAS - Alta X
        • Pilot Pro + Herelink
        • FAA Remote Identification (RID)
          • Remote ID Broadcast Module
        • Pilot Pro w/ RFD900
        • UXV Navtab w/ RFD900 (legacy)
          • UXV / RFD900 Radio Tech Specs
        • Isolator Cartridges
        • Skyview
        • Radio Transmitters
        • FPV Camera and Transmitter
        • LIDAR
        • External Computer
        • MoVI Carbon
        • 5V/12V DC-DC Converters
        • DJI Transmission
        • 12mm Rails Kit
        • Skid Landing Gear
      • Maintenance
        • Software Release Notes
        • Troubleshooting
          • Alta X Recovery Instructions
          • UXV Samsung Tablet Recovery Instructions
      • Testing and Certification
        • Test Documentation
        • Flight Testing
        • Certifications
        • Manufacturing Workflow
      • Appendix
        • Technical Specs
        • Performance Specs
        • Electrical Interfaces
        • Technical Drawings and CAD
        • Alta X Motor Change June 2022
        • Security Precautions and Best Practices
      • Legal
    • ALTA 8 Pro
      • Overview
        • Introduction
        • Specifications
        • Limitations
        • Abbreviations and Terminology
        • Systems Diagrams
        • ALTA 8 Pro Ground Control Desktop and Mobile App
        • CAD File
      • Setting up ALTA 8 Pro
        • First Time Setup
        • Unfolding and Folding ALTA
        • Radio Calibration and Channel Mapping
        • Configuring for MōVI
        • Isolator Cartridges
        • Battery Installation
        • Sensor Calibration
        • Propellers
        • Tuning ALTA Pro's Flight Controller
        • Additional Parameters
        • Saving, Loading, and Resetting Parameters
        • Updating your Wifi Password and SSID
      • Operating ALTA Pro
        • Flight Controller Modes
        • Home Switch
        • Status Light
        • Orientation Lights
        • Alarms
        • Aircraft Monitor
        • Data Logging
      • Normal Procedures
        • Unpacking and Setup
        • Before Starting
        • Before Takeoff
        • After Every Flight
        • After Last Flight
      • Emergency Procedures
        • Emergency Guidance
        • Alarm Indication
        • Pilot Loss of Orientation
        • Unexpected Flight Controller Behavior
        • Battery Exhaustion
        • Radio Loss of Signal
        • Loss of FPV Signal
      • Performance
        • Environmental
        • Weight / Endurance Performance Data
        • Allowable Gross Weight
      • Maintaining ALTA 8 Pro
        • General Information and Techniques
        • Maintenance Items
        • Firmware Update Process
        • Motor Alignment
        • Guidelines Following an Accident
      • Troubleshooting
        • Default Tuning Values
    • ALTA Ground Control
      • Software Release Notes
    • Mōvi Pro Series
      • Troubleshooting Tree
        • IMU Errors and the Flipper Cable
      • Mōvi Pro Overview
        • Features
        • Specification
        • System Diagrams
        • Key Links
      • Mōvi XL Overview
        • Specification
        • System Diagrams
        • Key Links
      • Mōvi Carbon Overview
        • Mōvi Carbon Pro Tips
        • New Features
        • Specification
        • System Diagrams
        • Key Links
      • Software Release Notes
        • Troubleshooting - Updating Firmware
      • Power Surge
      • Blackjack
        • What's New
        • 360° Roll
      • Mōvi Controller
        • Connect Mōvi Controller and FRX Pro to your Mōvi
        • Firmware Updates
        • Software Release Notes
      • Technical Drawings and CAD
        • Mōvi XL Setup Stand
      • Mōvi Pro and Carbon SL4 Guide
      • Camera Support
        • Panasonic BGH1 / BS1H Firmware Update
        • Air Commander Entire Firmware Update
    • FRX Pro
      • Overview
        • Introduction
        • In the Box
        • System Diagram
      • Specifications
      • Using FRX Pro
        • Mounting
        • Binding and Setup
        • Updating and Configuration
      • Troubleshooting
      • Software Release Notes
    • RTK GPS
      • Overview
      • Quick Start Guide
      • Module Installation
      • User Interface
      • RTK Theory of Operation
      • Specifications
      • Troubleshooting
      • Advanced Configuration
      • Firmware Release Notes
    • Motor Drives
      • Arc200
        • Getting Started
          • Basic Concepts
          • Mounting the Arc200
          • Wiring Arc200
          • Powering On and Throttle Safety
          • Sample Configurations
            • Dual Motor Skateboard
          • Multiple Drives
          • Warnings
        • Arc200 Firmware Updates
        • LED Codes
        • Freefly Tero Variant
      • Arc GUI
        • Basic Configuration and Auto Setup Wizard
        • Advanced Configuration (Parameter List)
      • API
      • Motor Drive FAQ's and Common Problems
    • SuperLight Batteries
      • Usage
      • Charging
      • Specifications
      • Interface
      • Maintenance
      • Firmware Updates
      • SL8 ESD Sticker Application Instructions
      • Warranty
      • Legal
    • Freefly Technical Standards
      • Torque Specifications
    • Wave Camera
      • Downloads
        • Previous Versions
      • Specifications
      • Maximum Frame Rates
      • FAQ
      • Camera Components
      • Exposure Guide
      • User Calibration
      • 4K vs. 2K
      • Amplify [BETA]
      • AI Enhance [BETA]
      • Troubleshooting
      • Laptop Recommendations
      • Lens Recommendations
      • Monitor Recommendations
      • Connector Pinouts
    • Ember Camera
      • Ember Quick Start Guide
      • Ember Firmware
      • Troubleshooting Guide
      • Resolutions and Frame Rates
      • Specifications
      • Menu and Settings
      • Pre-Record
      • Playback
      • Pinouts / Remote / Sync
      • Camera FAQ
      • Media Expander
      • Ember CAD
      • Ember App FAQ
      • Ember App Connection
        • Ember App Ethernet Setup
        • Ember App Wifi Setup
        • Ember App macOS Connection
      • Ember App Amplify (Beta)
      • Ember App Stabilization
      • Ember Scientific Toolbox App
        • Basic Usage & Exporting
        • Info Tab & Basic Tab
        • Vibration Tool
        • Amplify Tool
        • Tracking Tool
        • Measure Tool
        • Metadata Tool
  • ALTA Legacy CAD
Powered by GitBook
On this page
  • On Screen Display Control
  • Requirements
  • Usage
  • Freefly Ember
  • Panasonic BGH1 and BS1H:
  • ND Filter
  • Requirements
  • Usage
  • User 3 Switch
  • Camera Image Settings (Panasonic Cameras)
  • Requirements
  • Usage
  • Camera Playback (Panasonic Cameras)
  • Requirements
  • Usage

Was this helpful?

Export as PDF
  1. Products
  2. Mōvi Pro Series
  3. Mōvi Carbon Overview

New Features

This page describes how to use some of the newly added features to Mōvi Controller.

PreviousMōvi Carbon Pro TipsNextSpecification

Last updated 1 year ago

Was this helpful?

On Screen Display Control

This section describes how to use On Screen Display (OSD) control with Mōvi Controller. Camera types supported are:

  • Freefly Ember

  • Panasonic BGH1 or BS1H

Requirements

  • Mōvi firmware

    • Mōvi Pro, Carbon, or XL: or later

    • Mōvi Controller: or later

  • Freefly Ember Cameras

    • Ember firmware: v1.4.14 or later

  • Panasonic Cameras

    • : v2.5 or later

    • : v1.2 or later

    • : 1.790

  • Video Monitor (to see camera setting changes live)

Usage

1- By reviewing the above requirements, ensure all firmware are up to date on all devices.

2- Navigating to FIZ Config menu on Mōvi Controller, verify correct camera type is selected.

3- Navigating to OSD Control menu on Mōvi Controller, Control the screen.

Freefly Ember

OSD Control Options Available:

  • Menu Select

    • Press: Navigate back to home menu of Mōvi Controller.

  • Menu Set

    • Press: Select camera setting to change

    • Rotate (CW): Navigate right (or increase value)

    • Rotate (CCW): Navigate left (or decrease value)

Panasonic BGH1 and BS1H:

  • Menu Select

    • Press: Navigate back to home menu of Mōvi Controller.

    • Rotate (CW): Navigation button - Right

    • Rotate (CCW): Navigation button - Left

  • Menu Set

    • Press: Menu/Set button.

    • Press & Hold: Return/Exit button (exit)

    • Rotate (CW): Navigation button - Down

    • Rotate (CCW): Navigation button - Up

OSD control of the BGH1 and BS1H is only available when using the Entire Air Commander module running v1.790.

ND Filter

Freefly Ember Mōvi Carbon is equipped with a KipperTie Revolva integrated ND system that is actuated by a motor. The 4-position ND cartridge has optical density values of Clear/0.3/ 0.6/0.9. The ND filter can be toggled remotely with Mōvi Controller.

Panasonic BGH1 or BS1H Mōvi Carbon does not have a KipperTie Revolva integrated ND system (it includes lens mounted manually swappable ND filters). Additionally, Mōvi Pro does not have an electrical connection to support a motor actuated KipperTie Revolva.

This section describes how to adjust the ND Filter Menu with Mōvi Controller.

Requirements

Usage

  1. By reviewing the above requirements, ensure all firmware are up to date on all devices.

  2. Navigate to ND Filter menu on Mōvi Controller, to adjust the ND filter.

  3. Use the +/- 90 option to rotate between ND Filters.

  4. Use the +/- 1 to fine tune the ND Filter position only if necessary.

User 3 Switch

On Mōvi Controller, User 3 switch may be used to control the ND filter rotation.

  1. Navigate to TX Config menu on Mōvi Controller, and change "User 3 Function" to "ND Filter."

  2. Save the change ("TX Action" & save option) if you intend the change to be used next time Mōvi Controller boots up.

  3. Every time User 3 switch is rotated to the up position, ND Filter rotates 90 degrees.

Camera Image Settings (Panasonic Cameras)

This section describes how to use the camera control capabilities of the Mōvi Controller to change the image settings of the Panasonic BGH1 or BS1H. Users can adjust shutter angle, ISO, and color temperature using the Mōvi Controller on Mōvi Carbon with the Panasonic BGH1 or BS1H camera.

Requirements

  • Mōvi Carbon

    • GCU FW 2.2.0 or greater

    • TSU FW 2.1.0 or greater

  • Movi Controller FW v4.3.0 or greater

  • Panasonic BGH1 or BS1H camera

Usage

Image settings are located under the Cam Image menu. The following settings may be adjusted from the Mōvi Controller:

  • Shutter Angle

  • ISO

  • Color Temperature

The camera must be in manual mode to allow full camera control. Shutter speed and gain (sensitivity) must be set to ANGLE/ISO. White balance should be set to color temperature K1, K2, K3, or K4.

Shutter Angle

The shutter angle may be changed from 11° to 358°.

ISO

The ISO may be adjusted from Auto to 204800. Note camera configuration may limit the minimum or maximum ISO setting.

Color Temperature

The color temperature may be adjusted from 2500 K to 10000 K. The camera WB setting must be configured to color temperature K1-K4. If a WB setting other than K1-K4 is selected, Mōvi Controller will report the color temperature as zero.

Camera Playback (Panasonic Cameras)

This section describes how to use the camera control capabilities of the Mōvi Controller to control the camera playback of the Panasonic BGH1 or BS1H.

Requirements

  • Mōvi firmware

  • Panasonic Cameras

  • Video Monitor (to see camera setting changes live)

Usage

  1. By reviewing the above requirements, ensure all firmware are up to date on all devices.

  2. Navigate to FIZ Config menu on Mōvi Controller, verify correct camera type is selected.

  3. Navigate to Cam Playback menu on Mōvi Controller, Control the camera playback.

Mōvi Carbon firmware: or later

Mōvi Controller firmware: or later

Mōvi Pro, Carbon, or XL: or later

Mōvi Controller: or later

: v2.5 or later

: v1.2 or later

: 1.790

Power Surge
Power Surge
Power Surge
Power Surge
Entire Air Commander firmware
Power Surge
Power Surge
Entire Air Commander firmware
BGH1 camera firmware
BS1H camera firmware
BGH1 camera firmware
BS1H camera firmware